Sea to Sea Cycle Route at a Glance#
A varied, well-established coast-to-coast ride across northern England, best enjoyed over a long weekend or a relaxed week.
Time to Ride: Typically 3-5 days for most riders, depending on fitness and how much time you want for weather and sightseeing.
Best Time to Go: Late spring to early autumn is the usual window, when daylight is long and high passes are less likely to feel wintry.
Getting there: Common west-coast starts are Whitehaven or Workington in Cumbria, finishing at Sunderland in Tyne and Wear or via the branch to Tynemouth. Many riders use rail connections via larger hubs such as Carlisle or Newcastle upon Tyne.
Costs: Costs depend mainly on accommodation and whether you use a luggage transfer service. Budget extra for maps/guidebooks and for occasional paid attractions if you detour.
Difficulty: Moderate to Hard in practice: it is designed for a wide range of cyclists, but the route includes tough climbs with the high point over 609 m.
The Coast to Coast or Sea to Sea Cycle Route - usually shortened to C2C - is a 140 miles (230 km) ride opened in 1994 and built from linked sections of the UK National Cycle Network (notably routes 7, 14, 71 and 72). It runs from Whitehaven or Workington on the Irish Sea across northern England to the North Sea at Sunderland or, via a northern branch, Tynemouth.
From the west, you thread into the western and northern Lake District before turning east through Penrith and the Eden Valley. The ride then bites hard as it climbs towards Hartside Pass and the North Pennines - the “roof of England” - before an undulating crossing of old lead-mining villages such as Garrigill, Nenthead and Rookhope.
The final run eases through former industrial landscapes into Consett (reached via the dramatic Hownes Gill Viaduct) and then on through places including Beamish to the coast. Along the way you will also spot public artworks commissioned for the route, including works by Tony Cragg, Andy Goldsworthy and Alison Wilding.
The Route: Stages & Highlights#
- Stage 1: Whitehaven to Keswick (via Loweswater) - A big opening day through west Cumbria into the Lake District, mixing quiet roads with traffic-free sections; expect rolling terrain that builds gradually.
- Stage 2: Workington to Keswick (via Cockermouth) - The alternate start option, also feeding into the northern Lakes; a popular choice if you prefer this line into Keswick.
- Stage 3: Keswick to Penrith and the Eden Valley - A transition stage out of the Lakes to lusher valleys and sandstone villages, generally faster going on quieter roads.
- Stage 4: Eden Valley to Hartside Pass and the North Pennines - The crux of the C2C: sustained climbing to the route’s high point (over 609 m), with exposed moorland and weather that can change quickly.
- Stage 5: Garrigill - Nenthead - Rookhope through the Durham Dales - A classic Pennines crossing through former lead-mining settlements, with constant up-and-down riding rather than one single climb.
- Stage 6: Waskerley Moor to Consett via Hownes Gill Viaduct - Moorland riding gives way to the impressive viaduct approach into the old steel town; surfaces vary as rail-trail sections appear.
- Stage 7: Consett to Sunderland (North Sea finish) - The easier finale via places including Leadgate, Annfield Plain, Stanley and Beamish, rolling into Tyne and Wear and the traditional wheel-dip at the sea.
- Optional finish: Consett to Tynemouth (Derwent Walk branch) - The northern branch splits at Consett and follows the Derwent Walk through Tyneside to the coast at Tynemouth.
Best Time to Cycle#
The usual riding season is late spring through early autumn, when the high ground in the Lake District and North Pennines is less likely to feel wintry and you have long daylight for slower off-road sections.
Expect changeable weather at any time, especially around Hartside Pass and moorland sections such as Waskerley Moor. After storms, some off-road links can be disrupted - floods in December 2015 damaged bridges in Cumbria - but alternative lines are typically signposted.
Getting There#
Most riders start in west Cumbria at Whitehaven or Workington and finish at Sunderland in Tyne and Wear or at Tynemouth via the branch from Consett. For rail planning, Carlisle (west) and Newcastle upon Tyne (east) are common hubs to connect with local services.
The classic direction is west to east. Sustrans note it is easier this way because of the prevailing winds from the west and because the gradients generally work in your favour.
Bike Hire & Practicalities#
The route is waymarked as part of the National Cycle Network and combines on-road riding with traffic-free paths, including disused railway lines; Sustrans summarise the mix as roughly 4% main roads, 50% minor roads and 46% cyclepaths/off-road.
Bike hire, e-bikes and luggage transfer are widely used on the C2C, but services vary by town and season. Because surfaces range from tarmac lanes to rougher rail-trail and track, check tyre choice and current diversions, especially where forestry work temporarily closes off-road sections.
Where to Stay Along the Way#
The C2C passes through established overnight towns and villages, so most riders use a chain of B&Bs, guesthouses and bike-friendly inns, with the densest choice around places like Keswick, Penrith and Consett. Accommodation standards range from simple to boutique depending on where you stop.
In peak months, it is sensible to book ahead, particularly in the Lake District where availability can tighten quickly. If you prefer flexibility, plan shorter “bail-out” options so you can adjust daily distances around weather on the Pennines.
