High Peak Trail

Wikimedia Commons

High Peak Trail

Cycle Route

The High Peak Trail is a classic Peak District rail trail: 27 km of crushed limestone riding along a former mineral railway with big, open-sky views. It is short enough for a relaxed half-day spin, yet varied, with dramatic cuttings, exposed ridgelines and historic inclines.

High Peak Trail DowlowHurdlowParsley HayFridenMinninglowMiddleton TopBlack RocksHigh Peak JunctionHigh Peak Junction, CromfordDowlow

High Peak Trail essentials

Route: Dowlow to High Peak Junction, Cromford
Best time: Apr-Oct
Difficulty: Moderate
Highest point: 386 m
Country: United Kingdom

High Peak Trail at a Glance#

A family-friendly rail trail with a few steeper railway inclines and outstanding White Peak views.

Time to Ride: Most riders do it in 2-4 hours one way, plus time for stops at visitor centres and viewpoints.

Best Time to Go: Late spring to early autumn for longer daylight and drier surfaces; pick a calm day if you want the high sections at their best.

Getting there: The trail runs between Dowlow (near Buxton) and High Peak Junction (near Cromford). Many riders use trains to reach Buxton or Cromford and then link to the trail.

Costs: Generally free to access; main costs are transport, food, and optional cycle hire at trail centres. Main costs are transport, food, and optional cycle hire at trail centres.

Difficulty: Moderate - mostly gentle gradients on a former railway, with naturally steeper inclines at the northern and southern ends and potentially strong winds on exposed sections.

The High Peak Trail follows the trackbed of the former Cromford and High Peak Railway, completed in 1831 to carry minerals and goods between the Cromford Canal at High Peak Junction and the Peak Forest Canal at Whaley Bridge. The line closed in stages during the Beeching era, with closures beginning in 1963 and full closure in 1967.

In 1971, the Peak Park Planning Board and Derbyshire County Council bought most of the trackbed and converted it for leisure use. Today it is a well-used walking, cycling and bridle route with a crushed limestone surface and several level access points, and it forms part of the National Cycle Network.

A key highlight is the elevated middle section around Ladmanlow, which reaches 386 m and opens up wide views across the limestone country of the Peak District. You also pass junctions and crossings with other major routes, including the Tissington Trail at Parsley Hay and the Limestone Way near Harboro’ Rocks.

The Route: Stages & Highlights#

  • Stage 1: Dowlow to Hurdlow (part of 27 km total) - A straightforward start on crushed limestone, with the feel of a railway formation and early glimpses of the open plateau.
  • Stage 2: Hurdlow to Parsley Hay (part of 27 km total) - Easy riding to the main trail hub, with good access, information, and a key junction with the Tissington Trail.
  • Stage 3: Parsley Hay to Friden (part of 27 km total) - Gentle gradients and classic White Peak scenery; look out for the sense of riding through broad, farmed limestone country.
  • Stage 4: Friden to Minninglow (part of 27 km total) - A quiet middle stretch with picnic spots and big-sky views when the weather is clear.
  • Stage 5: Minninglow to Middleton Top (part of 27 km total) - Approaching the southern end, the railway engineering becomes more obvious; this is also a practical place for facilities and cycle hire.
  • Stage 6: Middleton Top to Black Rocks to High Peak Junction (part of 27 km total) - The finishing run drops you toward the historic canal junction, with visitor facilities at High Peak Junction and nearby rock scenery around Black Rocks.
When to Go

Best Time to Cycle#

In practice the trail is rideable for much of the year, but the most comfortable window is roughly April to October when daylight is longer and the crushed limestone surface is less likely to be wet or soft.

The high point at Ladmanlow (386 m) gives great views in clear weather, but it can be cold and windy in poor conditions. Weekends and school holidays can be busy around hubs like Parsley Hay and the visitor centres.

Plan Your Ride

Getting There#

The northern end is at Dowlow, near Buxton; the southern end is at High Peak Junction near Cromford. For public transport, many riders base themselves around Buxton or Cromford and use local roads or short links to reach the trailheads.

Most people ride one-way between the ends and return by train or pre-arranged lift, or they do an out-and-back from one of the trail access points such as Parsley Hay or Middleton Top. Either direction works, but check the forecast because the higher sections can feel very exposed in wind and rain.

Bike Hire & Practicalities#

There is no indication of a permit requirement; the route is part of the National Cycle Network and is generally easy to follow. The route is part of the National Cycle Network and is generally easy to follow.

The surface is crushed limestone, suitable for hybrid bikes, touring bikes with wider tyres, and most leisure bikes; it is also designed for broad access with level entry at multiple points. Cycle hire is available at Parsley Hay and Middleton Top (useful if you want to ride point-to-point with a pickup or a return plan).

Where to Stay Along the Way#

The trail itself is a day-ride length, so many cyclists stay in nearby towns such as Buxton or around Cromford and ride the route as a return trip or with a shuttle. In the surrounding Peak District villages you will also find guesthouses and small inns, plus campsites in the wider area.

If you are travelling in summer or over weekends, booking ahead is sensible, especially in and around the most popular bases near the trailheads and the connected routes like the Tissington Trail and the developing White Peak Loop.